Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Registration plate issues | 13 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front position lamp flickers when tapped lightly by hand |1.1.3c| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies brake light switch |1.3.1a| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Indicator switch does not operate the direction indicators on the side selected hazard switch. |1.5.4| | 1 |
Brake disc|s| excessively worn rivets worn. |3.2.A1l| | 1 |
Registration plate lamp issues | 1 |
Brake disc|s| excessively worn Bobbins |3.2.A1l| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Front Upper All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Upper Direction indicator not working |1.5.1c| | 1 |
Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Exhaust mounting missing |7.1.1c| | 1 |
Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Direction indicator not working intermittent |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Wheel bearing has excessive play sprocket carrier bearing |5.1.3 |a| |i|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Drive chain sprocket so worn it is likely to fail Rear Sprocket Cush Drive Rubbers Worn (6.1.7 (c) (ii)) | 1 |
Nearside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Offside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Central Front Upper Handlebar retaining device loose Handle bar retaining bolts loose, tightened as required (2.2.1 (b) (i)) | 1 |
Central Front Inner Horn not working horn inoperative - cleaned electrical connections to correct (7.7 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Vehicle identification number incomplete (0.2 (b)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Brake disc significantly and obviously worn worn on bobbins (1.1.14 (a) (i)) | 1 |