Most common failures | No# failures |
---|
Headlamp aim out of alignment | 21 |
Registration plate issues | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Offside Front shock absorber seal failed and leaking oil fork leg seal excess leak |2.3.3| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Indicator switch defective |1.5.4| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain adjuster |6.2.1h| | 1 |
Front shock absorber seal failed and leaking oil o/s |2.3.3| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Registration plate lamp issues | 1 |
Position lamp switch does not operate in accordance with the requirements Pass light switch (4.2.2 (a)) | 1 |
Nearside Rear Lower Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |