Most common failures | No# failures |
---|
Headlamp aim out of alignment | 14 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Registration plate issues | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Drive chain excessively tight |6.2.1d| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Brake caliper|s| insecure |3.2.A1j| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Offside Front suspension assembly component cracked |2.3.1| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake lever has insufficient reserve travel Control 1 |1.1.2 |a|| | 1 |
Drive chain excessively tight The links |6.1.7 |k| |i|| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Centre Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Stop lamp remains on when the brake is released Front brake control |1.3.1e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Registration plate lamp issues | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Headlamp aim not tested as led fitted and is faulty (4.1.2 (b)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |