| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 8 |
| Registration plate issues | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Indicator switch insecure |1.5.4| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Horn not working |1.7.3a| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Exhaust mounting missing |7.1.1c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear An item not tested |Manual| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Nearside Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Brake clevis joint insecure (1.1.15 (c)) | 1 |
| Rear Brake component insecure REAR BRAKE ANCOR BOLT LOOSE (1.1.21 (c)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Central Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Central Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Exhaust has a major leak of exhaust gases mid section (6.1.2 (a)) | 1 |