>

MOT History from tests of petrol YAMAHA XT600s year 1987

Review the list of common YAMAHA XT600 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:79.39%
(The average a petrol YAMAHA XT600 year 1987 passes without issue)
Based on:456 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment25
Headlamp aim beam image kick up to the offside |1.6|11
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|11
Registration plate issues11
Rear reflector on motorcycle missing |1.4.1|7
Rear wheel spindle securing nut locking device missing |2.4.A.2b|5
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Horn not working |1.7.3a|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Horn not loud enough to be heard by another road user |1.7.3a|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
Front wheel spindle securing nut locking device missing |2.3.3a|2
Rear Rear suspension bearing has excessive free play |2.4.A2a|i||2
Drive chain excessively loose |6.2.1d|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Nearside Rear Direction indicator not working |1.5.1c|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Nearside Rear Direction indicators not working |1.5.1c|2
Offside Rear Direction indicators not working |1.5.1c|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Rear Rear suspension bush has excessive free play |2.4.A2a|i||2
Nearside Front Direction indicator not working |1.5.1c|2
Front Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Direction indicators flashing less than 60 times a minute |1.5.1c|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Footrest missing |6.2.1a|1
Fuel system component leaking |7.2.1a|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Inner Front Wheel spoke excessively loose |4.2.1b|1
Centre Rear Rear mono-shock insecure |2.4.B.4|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Exhaust excessively deteriorated |7.1.1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Rear Front wheel spindle securing nut locking device missing |2.3.3a|1
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Footrest missing |6.2.1a|1
Front Direction indicator missing |1.5.1a|1
Rear Direction indicator missing |1.5.1a|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Handlebar deformed |2.1.1b|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Front Wheel spoke excessively loose |4.2.1b|1
Front Brake locking device missing |3.2.A1e|1
Rear Direction indicator not working |4.4.1 |a| |ii||1
Front wheel spindle securing nut|s| loose |2.3.5a|1
Offside Front Footrest insecure |6.2.1a|1
Front Headlamp aim beam image kick up to the offside |1.6|1
Front position lamp missing |1.1.1a|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Steering headbearing has excessive free play |2.2.2|1
Rear Wheel has an excessively distorted bead rim. |4.2.2|1
Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Centre Rear Rear reflector on motorcycle missing |1.4.1|1
Nearside Front Direction indicators not working |1.5.1c|1
Offside Front Direction indicators not working |1.5.1c|1
Steering operation fouling on the fuel tank or bodywork on full lock on r/h lock |2.1.4 |b||1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Offside Direction indicator not working |1.5.1c|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Fuel cap sealing washer missing |7.2.2c|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Footrest insecure |6.2.1a|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Front Headlamp insecure |1.2.3b|1
Front Horn not working |1.7.3a|1
Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Rear Rear reflector missing |4.8.2 |a| |ii||1
Nearside Front Shock absorber has a serious fluid leak Excess oil from fork seal leaking onto caliper. |5.3.2 |b||1
Rear Shock absorber has an excessively worn bush |5.3.2 |c||1
Front Front wheel spindle securing nut locking device missing |2.3.3a|1
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Lower Rear mono-shock pivot excessively worn |2.4.B.4|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Stop lamp does not emit a steady light |1.3.1b|1
Nearside Front Indicator switch insecure |1.5.4|1
Riders seat insecure |6.2.1a|1
Direction indicators not working |1.5.1c|1
Rear Wheel spoke excessively loose |4.2.1b|1
Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Position lamp switch insecure |1.1.4b|1
Indicator switch insecure |1.5.4|1
Front Headlamp aim beam image kick-up is to the offside |1.6.1|1
Front Front position lamp missing |1.1.1a|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Rear reflector on motorcycle missing (1.4.1)1
Horn not working (7.7 (a) (ii))1
Stop lamp not working when operating rear brake (4.3.1 (a) (ii))1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Horn not working not working /missing (7.7 (a) (ii))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Rear reflector missing (4.8.2 (a) (ii))1
Rear Position lamp not working (4.2.1 (a))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy