Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Upper Direction indicators not working |1.5.1c| | 1 |
Offside Front Upper Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Upper Direction indicators not working |1.5.1c| | 1 |
Offside Rear Upper Direction indicators not working |1.5.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Suspension rod pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride axle nut |6.2.1h| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Horn not working (7.7 (a)) | 1 |