| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 6 |
| Horn not working |1.7.3a| | 5 |
| Registration plate issues | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Brake component is excessively corroded |3.1.5| | 1 |
| Brake back plate|s| securing bolt|s| loose operating arm securing bolt loose |3.2.A1j| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Chain guard fouling another component |6.2.1c| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Headlamp deteriorated and function impaired too dim! |1.2.3a| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear suspension bearing has excessive free play suspension linkage bearings |2.4.A2a|i|| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Wheel spoke missing |4.2.1b| | 1 |
| Rear Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Wheel spoke excessively loose |5.2.2 |d|| | 1 |
| Rear Wheel fixing missing |single fixing| |5.2.1 |a| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Registration plate lamp issues | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |