| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 8 |
| Registration plate issues | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Nearside Front Handlebar handgrip missing |2.1.1c| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Motorcycle structure adversely modified steering head bottom bearing mounting has been modified and the weld is insufficient |6.1.1b| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Steering lock stop missing |2.1.3| | 1 |
| Offside Steering lock stop maladjusted |2.1.3| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Headlamp switch insecure |1.2.4| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |