Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Registration plate issues | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen kick up to right not left |4.1.2 |a|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected revs up on right hand lock |6.2.7 |a| |ii|| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Horn not working horn very poor |loudness| |1.7.3a| | 1 |
Throttle operating incorrectly Revs raising and slightly sticking |6.2.1f| | 1 |
Nearside Front Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Offside Position lamp not working |4.2.1 |a|| | 1 |
Offside Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Direction indicator missing all |1.5.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Lower Brake locking device missing |3.2.A1e| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Lower Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear reflector on motorcycle missing replaced |1.4.1| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Upper Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Centre Front Upper Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Upper Engine mounting/bracket missing missing (6.1.8 (a) (ii)) | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Rear Suspension arm pin or bush excessively worn Swinging arm (5.3.4 (a) (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Suspension component pin or bush excessively worn Front fork bushes worn (5.3.4 (a) (i)) | 1 |
Horn not working (1.7.3a) | 1 |
Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
Rear Roller brake test indicates a binding brake (3.3.A1a) | 1 |