Most common failures | No# failures |
---|
Registration plate issues | 10 |
Headlamp aim out of alignment | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Riders seat insecure |6.2.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Offside Rear Direction indicators not working Re Fitted detached electrical conector. |1.5.1c| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake component has an inadequate repair |3.1.5| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Horn not working |7.7 |a| |ii|| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Centre Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle operating incorrectly when steering turned to the right. |6.2.7 |a| |i|| | 1 |
Nearside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Horn not working |1.7.3a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Both |6.2.1h| | 1 |
Front Body insecure and dangerous to other road users mudguard missing wheel not coverd by 50% not conform to uk road use |6.1.B.1b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Headlamp aim beam image too far to the right |1.6.4| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |