Most common failures | No# failures |
---|
Headlamp aim out of alignment | 145 |
Rear reflector on motorcycle missing |1.4.1| | 87 |
Registration plate issues | 56 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 31 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 29 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Drive chain excessively loose |6.2.1d| | 19 |
Drive chain excessively tight |6.2.1d| | 15 |
Rear Rear reflector on motorcycle missing |1.4.1| | 15 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 14 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 13 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 13 |
Rear reflector missing (4.8.2 (a) (ii)) | 13 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 11 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 11 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Offside Front Footrest insecure |6.2.1a| | 10 |
Headlamp aim beam image kick up to the offside |1.6| | 9 |
Horn not working |1.7.3a| | 9 |
Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
Nearside Front Footrest insecure |6.2.1a| | 8 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 8 |
Throttle operating incorrectly |6.2.1f| | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Rear Position lamp not working (4.2.1 (a)) | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear reflector missing |4.8.2 |a| |ii|| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Stop lamp remains on when the brakes are released | 6 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Headlamp insecure |1.2.3b| | 5 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
Front Position lamp not working (4.2.1 (a)) | 4 |
Registration plate lamp issues | 4 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 4 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Centre Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 3 |
Indicator switch insecure |1.5.4| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
An item not tested |Manual| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Front Valve stem seriously damaged (5.2.3 (j)) | 3 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |