| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 21 |
| Rear reflector on motorcycle missing |1.4.1| | 17 |
| Registration plate issues | 8 |
| Headlamp aim beam image kick up to the offside |1.6| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Rear Drive chain excessively tight |6.2.1d| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Horn not working |1.7.3a| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Clutch lever shortened so it cannot be readily operated. snapped |6.2.1g| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Horn is not a constant note |1.7.3c| | 1 |
| Rear Chain guard fouling another component |6.2.1c| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Nearside Front Brake locking device missing |3.2.A1e| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Centre Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Front Valve stem seriously damaged |4.1.D.1e| | 1 |
| Rear Brake linkage locking device missing |3.5.1l| | 1 |
| Brake lever locking device insecure |3.5.1l| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Brake cylinder has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Rear Brake cylinder has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Exhaust system insecure clamp bolt (6.1.2 (a)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |