>

MOT History from tests of petrol YAMAHA XJ900s year 2003

Review the list of common YAMAHA XJ900 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:87.45%
(The average a petrol YAMAHA XJ900 year 2003 passes without issue)
Based on:1,251 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment14
Front position lamp does not illuminate immediately when switched on |1.1.3a|10
Front wheel bearings have excessive free play |2.3.5b|6
Front Roller brake test indicates a binding brake |3.3.A1a|6
Exhaust is leaking and excessively noisey |7.1.1b|5
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Rear Roller brake test indicates a binding brake |3.3.A1a|5
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Registration plate issues4
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Front Brake disc|s| has excessive run out |3.2.A1m|3
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Front Brake lever has inadequate reserve travel |3.1.3b|3
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Rear Stop lamp not working |4.3.1 |a| |ii||2
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|2
Steering headbearing has excessive free play |2.2.2|2
Front Roller brake test indicates a sticking brake |3.3.A1a|2
Rear Brake disc|s| cracked |3.2.A1g|2
Rear Brake disc|s| excessively scored |3.2.A1l|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Service brake: efficiency below requirements |3.7.C.1a|2
Parking brake: efficiency below requirements |3.7.C.1b|2
Nearside Rear reflector missing |1.5.1a|2
Registration plate lamp issues2
Exhaust has a major leak of exhaust gases |6.1.2 |a||2
Offside Front Direction indicator not working |1.5.1c|2
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Nearside Front Brake disc|s| has excessive run out |3.2.A1m|2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Rear reflector on motorcycle missing |1.4.1|2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Front wheel bearings are excessively rough |2.3.5b|2
Rear Position lamp not working (4.2.1 (a))2
Front Brake excessively binding (1.2.1 (f))2
Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Nearside Rear Exhaust excessively deteriorated |7.1.1a|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Exhaust excessively deteriorated |7.1.1a|1
Lower Exhaust is leaking and excessively noisey |7.1.1b|1
Fuel hose leaking |7.2.1a|1
Front wheel has a missing wheel nut|s| |4.2.3a|1
Fairings insecure and likely to impede the steering |2.1.2e|1
Front Brake master cylinder fluid level dangerously low |3.2.B1d|1
Rear Brake locking device insecure |3.2.A1e|1
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j|1
Throttle operating incorrectly Not Returning |6.2.1f|1
Roller brake test indicates excessive fluctuation of brake effort Rear |3.3.A1d|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Footrest insecure |6.2.1a|1
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i|1
Front Position lamp not working |4.2.1 |a||1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Front Steering headbearing has excessive free play |2.2.2|1
Handlebar deformed |2.1.1b|1
Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.C.1a|1
Nearside Parking brake efficiency below requirements |3.7.C.1b|1
Centre Headlamp not working on main beam |1.7.5a|1
Offside Rear reflector missing |1.5.1a|1
Parking brake efficiency below requirements |3.7.C.1b|1
Exhaust has a major leak of exhaust gases |7.1.2|1
Horn not working |7.7 |a| |ii||1
All position lamps not working |4.2.1 |a||1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Headlamp not working on main beam |4.1.1 |a| |ii||1
Headlamp aim not tested |4.1.2 |b||1
Brake pedal has insufficient reserve travel |1.1.2 |a||1
Front Brake performance not tested |1.2.1 |g||1
Rear Brake performance not tested |1.2.1 |g||1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Horn not working |1.7.3a|1
Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Offside Front Direction indicator insecure |1.5.3b|1
Rear Stop lamp does not illuminate immediately a brake applies operated |1.3.1a|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Offside Steering lock stop ineffective |2.1.3|1
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Rear Rear reflector missing |4.8.2 |a| |ii||1
Front Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Exhaust system insecure |6.1.2 |a||1
Stop lamp does not illuminate immediately a brake applies FRONT BRAKE LIGHT SWITCH |1.3.1a|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Stop lamp not working |4.3.1 |a| |ii||1
Rear Position lamp not working |4.2.1 |a||1
Front Shock absorber has negligible damping effect front forks |5.3.2 |b||1
Rear Brake reaction bracket securing bolt|s| missing lock pin missing |3.2.A1j|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.C.1a|1
Front Headlamp aim beam image kick up to the offside |1.6|1
Brake pedal has inadequate reserve travel |3.1.3b|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Front Brake lever pivots excessively worn |3.1.3a|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Brake reaction bracket securing bolt|s| loose |3.2.A1j|1
Rear Suspension component pin or bush excessively worn |5.3.4 |a| |i||1
Rear Hydraulic brake control feels spongy |3.1.4a|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
Nearside Rear Footrest missing |6.2.1a|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Handlebar handgrip not secure to handlebars. |2.1.1c|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Direction indicators not working |1.5.1c|1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Front Brake grabbing severely |1.2.1 |c||1
Steering lock stop ineffective |2.1.3|1
Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Offside Front Brake disc|s| has excessive run out |3.2.A1m|1
Offside Outer Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Front suspension has inadequate damping effect. |2.3.6c|1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Rear Brake component insecure anchor arm (1.1.21 (c))1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Front All position lamps not working (4.2.1 (a))1
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Front Shock absorber has a serious fluid leak at fork stanchion seal (5.3.2 (b))1
Rear reflector missing (4.8.2 (a) (ii))1
Central Lower Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Horn not working (7.7 (a) (ii))1
Front Brake grabbing severely (1.2.1 (c))1
Front Shock absorber has a serious fluid leak L/H (5.3.2 (b))1
Rear Shock absorber has negligible damping effect (5.3.2 (b))1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Offside Rear All direction indicators not working (4.4.1 (a) (ii))1
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Rear Suspension component ball joint excessively worn (5.3.4 (a) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy