Most common failures | No# failures |
---|
Headlamp aim out of alignment | 20 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Horn not working |1.7.3a| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Front Horn not working |1.7.3a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Upper Horn not working |1.7.3a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Centre front brake recording little or no effort |3.7.B.5a| | 1 |
Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
Offside Front Mechanical brake component securing device loose |3.5.1i| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Sidecar wheel alignment has excessive toe-out |5.3.1a| | 1 |
Sidecar wheel alignment has excessive vertical misalignment which adversely affects the handling of the combination |5.3.2| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Front An item not tested |Manual| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Sidecar rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Front Upper Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Upper Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Rear Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Front Upper Direction indicators not working |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
An item not tested |Manual| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Rear Brake inadequately mounted housing (1.1.21 (c)) | 1 |
Nearside Rear Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
Front Headlamp insecure (1.2.3b) | 1 |
Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
Rear Roller brake test indicates a binding brake (3.3.A1a) | 1 |
Front Hydraulic brake control feels spongy (3.1.4a) | 1 |
Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 1 |
Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls front brake (4.3.2 (a) (iii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Brake lever insecure (1.1.2 (e) (i)) | 1 |
Offside Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |