Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Registration plate issues | 6 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Parking brake: efficiency below requirements |3.7.C.1b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Horn not working |1.7.3a| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake lever attachment screws loose |3.1.2b| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Horn control defective |1.7.2a| | 2 |
Centre Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake hose bulging under pressure |1.1.12 |d|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Front Brake hose stretched |3.6.B.4c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Direction indicators not working All |1.5.1c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear brake binding | 1 |
Rear Stop lamp not working both |1.2.1b| | 1 |
Nearside Front Stop lamp not working |1.2.1b| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Offside Rear Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Upper Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Parking brake efficiency below requirements |3.7.C.1b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Horn not working |1.7.3a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Fuel system component leaking petrol tap not shutting off causing fuel to overflow from carburettors |7.2.1a| | 1 |
Front Brake caliper insecure |1.1.16 |c| |i|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Wheel fixing missing |single fixing| Split pin missing front wheel spindle |5.2.1 |a| |ii|| | 1 |
Direction indicators not working Indicator intermittent fault on steering lock to lock |PRS| |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |