Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 9 |
Headlamp aim out of alignment | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Registration plate issues | 7 |
Rear reflector missing (4.8.2 (a) (ii)) | 6 |
Registration plate lamp issues | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
Horn not working |1.7.3a| | 2 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Central Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Brake disc significantly and obviously worn Rear disc bent |1.1.14 |a| |i|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Nearside Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Brake component inadequately mounted rear brake caliper mount insecure |1.1.21 |c|| | 1 |
Throttle operating incorrectly sticking on right turn |6.2.1f| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Throttle operating incorrectly throttle not returning |6.2.1f| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain excessively tight Chain has tight spot |6.2.1d| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Steering linkage locking device ineffective handle bars hiting tank on full locks both sides |2.1.3 |d|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts Rubbing footrest on up & down movement! |3.2.B2c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Headlamp reflector missing (4.1.1 (b) (ii)) | 1 |
Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working front brake lever switch not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Footrest insecure (6.2.12 (a)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Stop lamp not working switch spring was detached (4.3.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Central Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Central Rear Position lamp not working (4.2.1 (a)) | 1 |