Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Rear Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp remains on when the brake is released front control |1.3.1e| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Offside Front Lower Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Centre Front Upper Horn not working |1.7.3a| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Centre Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Brake hose excessively kinked |3.2.B3a| | 1 |
Nearside Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Horn not working |1.7.3a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Centre Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear mono-shock insecure |2.4.B.4| | 1 |
Nearside Rear Upper Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings underseat framework |6.1.B.2| | 1 |
Offside Rear Upper Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings underseat framework |6.1.B.2| | 1 |
Central Rear Mechanical brake component locking device insecure |3.5.1l| | 1 |
Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
Offside Rear brake disc contaminated by grease |3.5.1h| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Nearside Rear Upper Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings frame to underside of seat welds cracked |6.1.B.2| | 1 |
Offside Rear Upper Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings frame to underside of seat weld cracked |6.1.B.2| | 1 |
brake caliper securing device loose |3.5.1j| | 1 |
brake caliper securing device missing |3.5.1j| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Front Wheel alignment incorrect which adversely affects the handling RE wheel kicking |2.5.1| | 1 |
Fuel cap mounting flange/sealing method defective filler on tank slightly corroded/ deteriorated |7.2.2c| | 1 |
Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Handlebar handgrip not secure to handlebars. L/H |2.1.1c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Upper Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Registration plate issues | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Brake pedal is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Central Front Shock absorber has a serious fluid leak both fork seals leaking badly (5.3.2 (b)) | 1 |
Nearside Front Clutch lever bent so it cannot be readily operated plus broken of (6.2.7 (b)) | 1 |
Offside Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Registration plate lamp issues | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |