Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Registration plate issues | 3 |
Stop lamp remains on when the brakes are released | 3 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicator flashing less than 60 times a minute Not flashing when engine is at idle |1.5.1c| | 1 |
Centre Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Rear Suspension component mounting modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
Rear Wheel more than one fixing missing split pin |5.2.1 |a| |ii|| | 1 |
Rear Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Central Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Nearside Fuel system component insecure Fuel Tank N/S front cushion mount missing |7.2.1b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Registration plate lamp issues | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Horn not working |1.7.3a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Footrest insecure (6.2.12 (a)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
All direction indicators not working all not flashing (4.4.1 (a) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |