Most common failures | No# failures |
---|
Headlamp aim out of alignment | 54 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 47 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 33 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 28 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 24 |
Horn not working |1.7.3a| | 23 |
Stop lamp remains on when the brakes are released | 21 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 19 |
Registration plate issues | 18 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 15 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 14 |
Horn not working (7.7 (a) (ii)) | 13 |
Rear reflector missing (4.8.2 (a) (ii)) | 13 |
Horn not working |7.7 |a| |ii|| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 12 |
Front Brake excessively binding (1.2.1 (f)) | 12 |
Front Brake excessively binding |1.2.1 |f|| | 10 |
Rear reflector on motorcycle obscured |1.4.2b| | 10 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 9 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 9 |
Horn not working (7.7 (a)) | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Riders seat insecure (6.2.5 (a) (ii)) | 8 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 8 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 8 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 8 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 7 |
Front Brake disc|s| excessively worn |3.2.A1l| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Riders seat insecure |6.2.1a| | 6 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 6 |
Front brake disc in such a condition that it is seriously weakened | 6 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 6 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Front Position lamp not working (4.2.1 (a)) | 5 |
Rear Brake excessively binding (1.2.1 (f)) | 5 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear reflector on motorcycle obscured |1.4.1| | 4 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Nearside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 4 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Fuel cap sealing washer torn |7.2.2c| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Headlamp aim not tested |1.6| | 3 |
Horn control defective |1.7.2a| | 3 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 2 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Fuel cap ineffective |6.1.3 |b| |i|| | 2 |
Brake lever has insufficient reserve travel rear brake lever |1.1.2 |a|| | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Indicator switch inoperative (4.4.2 (a) (ii)) | 2 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 2 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 2 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Rear Brake lagging in operation (1.2.1 (d)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 2 |