| Most common failures | No# failures |
|---|
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
| Headlamp aim out of alignment | 12 |
| Registration plate issues | 10 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Registration plate lamp issues | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Brake component leaking fluid |3.2.B4| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Brake performance not tested |3.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| Nearside Rear suspension component cracked adjuster |2.4.A.1a| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on number plate lamp |1.1.3a| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Offside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Rear Road spring mounting corroded and seriously weakened (5.3.1 (b) (i)) | 1 |
| Offside Rear Road spring mounting corroded and seriously weakened (5.3.1 (b) (i)) | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |