Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 7 |
Registration plate issues | 4 |
Horn not working |1.7.3a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Horn missing |1.7.1| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn sound not in accordance with requirements (7.7 (c)) | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp aim out of alignment | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Wheel spoke excessively loose Most spokes excessively loose (5.2.2 (d)) | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Fuel system component leaking from fuel tap (6.1.3 (b) (i)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |