>

MOT History from tests of petrol YAMAHA WR125s year 2009

Review the list of common YAMAHA WR125 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:63.48%
(The average a petrol YAMAHA WR125 year 2009 passes without issue)
Based on:230 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment13
Drive chain excessively loose |6.2.1d|9
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Rear reflector on motorcycle missing |1.4.1|8
Registration plate issues7
Front Roller brake test indicates a binding brake |3.3.A1a|6
Rear reflector missing (4.8.2 (a) (ii))5
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear Brake excessively binding (1.2.1 (f))4
Drive chain worn to excess |6.2.1e|4
Drive chain excessively tight |6.2.1d|3
Horn not working (7.7 (a))3
Drive chain excessively loose (6.1.7 (c) (i))3
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Exhaust is leaking and excessively noisey |7.1.1b|3
Rear reflector missing |4.8.2 |a| |ii||3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Rear Drive chain sprocket worn to excess |6.2.1e|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Headlamp insecure |1.2.3b|2
Front Position lamp not working (4.2.1 (a))2
Front Brake lever has insufficient reserve travel (1.1.2 (a))2
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Rear Position lamp not working (4.2.1 (a))2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Stop lamp not working |4.3.1 |a| |ii||2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Nearside Rear Drive chain excessively loose |6.2.1d|1
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))1
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii))1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Front Headlamp light intensity severely reduced (4.1.4 (a))1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Stop lamp remains on when the brake is released |1.3.1e|1
Headlamp switch insecure |1.2.4|1
Direction indicator flashing more than 120 times per minute Nearside & Offside |1.5.1c|1
Rear Decelerometer brake test indicates a binding brake |3.3.E1d|1
Front position lamp incorrect colour |1.1.2a|1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Stop lamp does not illuminate immediately a brake applies front brake light switch faulty |1.3.1a|1
Front Wheel spoke excessively loose 6x |5.2.2 |d||1
Offside Stop lamp does not illuminate by the operation of both brake controls lever (4.3.2 (a) (iii))1
Rear Shock absorber has a serious fluid leak (5.3.2 (b))1
Stop lamp does not emit a steady light |1.3.1b|1
Nearside Rear Wheel spoke excessively loose (5.2.2 (d))1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Front Brake excessively binding (1.2.1 (f))1
Headlamp aim not tested |4.1.2 |b||1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Offside Handlebar grip missing |2.2.1 |d| |i||1
Handlebar retaining device loose top clamps,although bar is held secure,play can be felt through movement |2.2.1 |b| |i||1
Steering headbearing excessively stiff or notchy stiffness/notchiness in steering movement |2.2.2 |f| |i||1
Front Wheel excessively distorted flat in rim, both sides of front wheel |5.2.2 |c| |i||1
Shock absorber has negligible damping effect rear suspension siezed. Suspension stays down when depressed. |5.3.2 |b||1
Front Drive chain sprocket so worn it is likely to fail teeth missing, badly worn |6.1.7 |c| |ii||1
Wheel alignment incorrect which adversely affects the handling chain tensioner plates loose at rear,not insecure,and wheel alignment is off. |2.4 |a||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Forks excessively deformed front forks out of line (2.2.2 (d) (i))1
Headlamp aim projected beam image obviously incorrect led bulb retro fitted, giving bad beam pattern (4.1.2 (c))1
Registration plate lamp issues1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear Wheel spoke excessively loose |4.2.1b|1
Rear Plate brake test indicates a binding brake |3.3.B1a|1
Stop lamp does not illuminate by the operation of both brake controls front brake light switch needed connecting (4.3.2 (a) (iii))1
Brake lever insecure (1.1.2 (e) (i))1
Nearside Rear Direction indicators not working |1.5.1c|1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Drive chain sprocket worn to excess |6.2.1e|1
Front Drive chain sprocket worn to excess |6.2.1e|1
Horn not working |7.7 |a| |ii||1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Headlamp incorrect colour (4.1.4 (a))1
Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d))1
Rear Footrest missing (6.2.12 (a))1
Rear Rear reflector on motorcycle missing |1.4.1|1
Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Clutch lever positioned so it cannot be readily operated. fouling hand guard |6.2.1g|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Nearside Front Upper Direction indicators not working |1.5.1c|1
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3|1
Central Front Upper Steering headbearing has excessive free play |2.2.2|1
Central Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i||1
Throttle operating incorrectly |6.2.1f|1
Brake pedal cannot be applied smoothly |3.1.3d|1
Brake pedal cannot be released smoothly |3.1.3d|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Horn not working |1.7.3a|1
Rear Drive chain excessively loose |6.1.7 |c| |i||1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Horn not working (7.7 (a))1
Front Horn not working |1.7.3a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy