Most common failures | No# failures |
---|
Registration plate issues | 23 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Horn not working |1.7.3a| | 9 |
Headlamp aim out of alignment | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Horn missing |1.7.1| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Horn missing |1.7.1| | 2 |
Front Stop lamp missing |1.3.3a| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Front wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
Front Front wheel has a missing wheel bolt|s| |4.2.3a| | 1 |
Offside Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Fuel system component leaking Carburetor overflow pipe. (6.1.3 (b) (i)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Front Brake disc|s| insecure fixing missing |3.2.A1g| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Lower Rear position lamp missing |1.1.1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working front lever (4.3.1 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Fuel system component leaking |6.1.3 |b| |i|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Headlamp insecure |1.2.3b| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |