Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 17 |
Registration plate issues | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Horn missing |1.7.1| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp aim out of alignment | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Horn not working |1.7.3a| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp obscured |1.3.1c| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Upper Horn not working |1.7.3a| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Lower Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Lower Footrest insecure |6.2.1a| | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Shock absorber has negligible damping effect rear linkage seized (5.3.2 (b)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Stop lamp does not illuminate immediately a brake applies no stop lamp fitted |1.3.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain locking circlip incorrectly fitted |6.2.1h| | 1 |
Direction indicator missing all 4 missing but switch gear if fitted to the motorcycle |1.5.1a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Front Stop lamp missing |1.3.3a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Upper Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Drive chain excessively loose chain to loose |6.2.1d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Central Front Lower Shock absorber has a serious fluid leak both fork seals leaking (5.3.2 (b)) | 1 |
Outer Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Lower Rear suspension bearing has excessive free play rear lower link bearings |2.4.A2a|i|| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Throttle operating incorrectly |6.2.1f| | 1 |