Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Registration plate issues | 22 |
Rear reflector on motorcycle missing |1.4.1| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Horn not working |1.7.3a| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 2 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Rear parking brake recording little or no effort | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Brake disc|s| friction surface contaminated by oil or grease front |3.2.A1k| | 1 |
Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Seat insecure NOT LOCATED PROPERLY |6.2.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake disc contaminated both fronts with fork oil (1.1.14 (b)) | 1 |
Headlamp incorrect colour (1.2.1) | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake hose excessively twisted from master cyinder to splitter box @ splilter end (1.1.12 (b) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Registration plate lamp issues | 1 |
Central Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
Central Rear Upper Stop lamp does not illuminate by the operation of both brake controls rear brake light not working/flickering when pressed Adjusted switch to correct (4.3.2 (a) (iii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Front Brake fluid reservoir fluid level dangerously low (3.2.B1d) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Front Shock absorbers has a serious fluid leak | 1 |
Offside Front Shock absorbers has a serious fluid leak | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |