Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Registration plate issues | 12 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Horn not working |1.7.3a| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Direction indicator affected by the operation of another lamp all indicators work on initial oporation |1.5.1c| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear Parking brake not fitted on at least one wheel on a 3 wheeled vehicle |3.1.1| | 1 |
Rear Brake pedal has no servo assistance |3.3.B.2| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Brake hose excessively deteriorated | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Centre Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Front Position lamp switch does not illuminate all position lamps with a single operation |4.2.2 |a|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Throttle operating incorrectly sticks open |6.2.1f| | 1 |
Exhaust excessively deteriorated n/s and o/s intermediate pipes from headers to silencers corroded and blowing |7.1.1a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Horn not working insecure fixing bracket |1.7.3a| | 1 |
Front Front wheel spindle securing nut locking device missing front speedo drive/spacer incorrectly fitted not located in stop on fork leg |2.3.3a| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal attachment screws missing. |3.1.2b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Suspension rod attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake performance not tested |3.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Horn not working |7.7 |a| |ii|| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Headlamp not working on main beam bulb replaced (4.1.1 (a) (ii)) | 1 |
Central Front Brake hose connection leaking (1.1.12 (c)) | 1 |
Offside Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |