| Most common failures | No# failures |
|---|
| Registration plate issues | 9 |
| Headlamp aim out of alignment | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Steering lock stop maladjusted |2.1.3| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Suspension arm cracked |2.4.G.1| | 1 |
| Offside Rear Brake cable locking device missing |3.5.1l| | 1 |
| Brake lever mounting insecure |9.3.1b| | 1 |
| Horn not working |1.6.2a| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Brake performance not tested |3.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Offside Front Footrest insecure |6.2.12 |a|| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Riders seat insecure |6.2.1a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Nearside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |