MOT History from tests of petrol YAMAHA V MAXs year 1993

Review the list of common YAMAHA V MAX failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history

Pass percent:80.59%

(The average a petrol YAMAHA V MAX year 1993 passes without issue)

Based on:170 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	9
Registration plate issues	6
Horn not working \|1.7.3a\|	3
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Direction indicator not working \|1.5.1c\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Front Stop lamp deteriorated and function impaired \|1.3.3a\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Steering control handlebar movement restricted by cables caught on a projection \|2.1.2c\|	1
Offside Front Steering lock stop ineffective \|2.1.3\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Shock absorber has a serious fluid leak fork seal (5.3.2 (b))	1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	9
Registration plate issues	6
Horn not working \|1.7.3a\|	3
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Direction indicator not working \|1.5.1c\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Front Stop lamp deteriorated and function impaired \|1.3.3a\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Brake caliper\|s\| securing bolt\|s\| loose \|3.2.A1j\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Steering control handlebar movement restricted by cables caught on a projection \|2.1.2c\|	1
Offside Front Steering lock stop ineffective \|2.1.3\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Headlamp aim headlamp deteriorated and function impaired \|1.2.3a\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Nearside Shock absorber has a serious fluid leak fork seal (5.3.2 (b))	1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i))	1

MOT History from tests of petrol YAMAHA V MAXs year 1993

Find us on Facebook