| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 6 |
| Registration plate issues | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Horn not working |1.7.3a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
| Nearside Side repeater missing |4.4.1 |a| |ii|| | 1 |
| Offside Side repeater missing |4.4.1 |a| |ii|| | 1 |
| Nearside Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Central Exhaust system insecure (6.1.2 (a)) | 1 |
| Central Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Stop lamp not working both (4.3.1 (a) (ii)) | 1 |