Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Rear reflector missing (4.8.2 (a) (ii)) | 6 |
Registration plate issues | 5 |
Rear Brake excessively binding (1.2.1 (f)) | 4 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Rear Brake pedal is bent and the brake cannot be readily applied (1.1.2 (d)) | 2 |
Headlamp insecure |4.1.1 |c|| | 1 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Rear torque arm |6.2.1h| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Brake fluid not visible |1.1.10 |d| |iii|| | 1 |
Front Shock absorber has a serious fluid leak both front seals leaking |5.3.2 |b|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Offside Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front Motorcycle structure is so deformed it is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Stop lamp not working when rear brake pressed (4.3.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
Central Rear Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Rear Direction indicator obviously incorrectly positioned Rear indicators less than 180mm apart (4.4.3 (a)) | 1 |
Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Front Riders seat missing (6.2.5 (a) (ii)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Wheel spindle loose split pin missing (5.2.1 (c) (i)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Position lamp adversely affected by the operation of another lamp when horn pressed (4.2.3 (b)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Wheel spindle locking device ineffective split pin replaced (5.2.1 (d)) | 1 |
Offside Rear Upper Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Chain guard insecure fouling chain (6.1.7 (i)) | 1 |
Shock absorber has a serious fluid leak front fork oil seals leaking (5.3.2 (b)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |