Most common failures | No# failures |
---|
Headlamp aim out of alignment | 20 |
Registration plate issues | 6 |
Horn not working (7.7 (a) (ii)) | 4 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Horn not working |1.7.3a| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Fuel system component leaking under fuel tank |7.2.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies switch faulty |1.3.1a| | 1 |
Rear Brake back plate|s| securing bolt|s| missing brake arm |3.2.A1j| | 1 |
Rear Brake reaction bracket insecure front slit pin missing |3.2.A1j| | 1 |
Front wheel has a loose wheel bolt|s| all |4.2.3a| | 1 |
Rear wheel has a loose wheel bolt|s| all |4.2.3a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Brake pedal insecure |1.1.2 |e| |i|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Fuel tank insecure |6.1.3 |a| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Front wheel spindle loose |2.3.3a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle adjustment beyond limits |6.2.7 |a| |ii|| | 1 |
Front Brake disc|s| insecure bolt loose |3.2.A1g| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear wheel splitpin missing |6.2.1h| | 1 |
Rear Wheel fixing missing |single fixing| split pin missing |5.2.1 |a| |ii|| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
Front Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
Offside Rear Exhaust system insecure |6.1.2 |a|| | 1 |
Central Front Fuel cap ineffective cap fitting loose |6.1.3 |b| |i|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working front brake |4.3.1 |a| |ii|| | 1 |
Stop lamp not working rear brake |4.3.1 |a| |ii|| | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Motorcycle structure is so deformed it is likely to adversely affect braking or steering rear shocker fowling chain guard under operation (6.1.1 (a) (ii)) | 1 |
Front Stop lamp not working front break switch not working/ replaced with new switch (4.3.1 (a) (ii)) | 1 |
Headlamp aim not tested front and rear (4.1.2 (b)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected revs up when steering turned to left (6.2.7 (a) (ii)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear reflector missing STICK ON FITTED (4.8.2 (a) (ii)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Nearside Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Brake excessively binding (1.2.1 (f)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Headlamp reflector missing (4.1.1 (b) (ii)) | 1 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Suspension arm pin or bush excessively worn swing arm bushes worn (5.3.4 (a) (i)) | 1 |
Rear Position lamp not working tail light (4.2.1 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Brake component insecure locking devise missing (1.1.21 (c)) | 1 |
Rear Brake rod insecure (1.1.15 (c)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Nearside Rear Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Nearside Rear Integral body structure modified such that structural rigidity is significantly reduced swing arm (6.1.1 (d) (i)) | 1 |
All position lamps not working not working when switch in side light position (4.2.1 (a)) | 1 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Nearside Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Rear Suspension component has excessive wear or free play (5.3.3 (d)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Brake rod insecure (1.1.15 (c)) | 1 |
Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear Brake component insecure rear brake plate torque arm insecure. Locking R clip fitted to secure. (1.1.21 (c)) | 1 |
Rear Brake drum insecure (1.1.14 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Exhaust has a major leak of exhaust gases Header (6.1.2 (a)) | 1 |
Rear Position lamp not working New bulb fitted. (4.2.1 (a)) | 1 |