Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Registration plate issues | 2 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Horn not working |1.7.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Roller brake test indicates a binding brake front |3.3.A1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Locking tabs on disc |6.2.1h| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
All direction indicators light intensity significantly reduced |4.4.3 |a|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Brake rod insecure |1.1.15 |c|| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Offside Rear Suspension rod attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
Front Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Front Fuel pipe insecure (6.1.3 (a) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Fuel tank so insecure there is a risk of fire (6.1.3 (a) (ii)) | 1 |
Fuel tank leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Engine mounting/bracket missing lower bolt (6.1.8 (a) (ii)) | 1 |
Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Horn not working missing (7.7 (a)) | 1 |
Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Headlamp lens seriously defective incorrect light units fitted (4.1.1 (b) (ii)) | 1 |
Rear Brake component insecure brake say nut loose (1.1.21 (c)) | 1 |