| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 13 |
| Headlamp aim out of alignment | 10 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Nearside Rear Footrest missing |6.2.1a| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Registration plate issues | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Front position lamp insecure |1.1.1c| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Nearside Steering lock stop ineffective |2.1.3| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Chain guard insecure |6.2.1c| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Stop lamp does not illuminate immediately a brake applies Front brake |1.3.1a| | 1 |
| Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake pedle mounting bolt lock pin |6.2.1h| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear suspension component cracked |2.4.A.1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear suspension component loose top shock mount |2.4.A.1a| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |