| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Footrest insecure |6.2.1a| | 2 |
| Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Headlamp aim projected beam image obviously incorrect beam kick up to offside (4.1.2 (c)) | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Steering lock stop missing |2.1.3| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Horn not working |1.7.3a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| An item not tested |Manual| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Registration plate issues | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Nearside Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Indicator switch insecure |1.5.4| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |