| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Horn not working |1.7.3a| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Rear Footrest missing |6.2.1a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Stop lamp does not illuminate immediately a brake applies Rear brake application. |1.3.1a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Split link on back to front. |6.2.1h| | 1 |
| Nearside Front Brake locking device missing Pad retaining pin. |3.2.A1e| | 1 |
| Offside Front Brake locking device missing Pad retaining pin. |3.2.A1e| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| An item not tested |Manual| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Drive chain worn to excess tight links |6.2.1e| | 1 |
| Nearside Front Drive chain sprocket worn to excess worn .. due to swing arm bearings, wheel bearing/alignment |6.2.1e| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride lock nut lose |6.2.1h| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Rear suspension bearing has excessive free play swing arm bearings |2.4.A2a|i|| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Offside Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Headlamp aim not tested no dipped beam |1.6| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Upper Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Registration plate issues | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Nearside Front suspension assembly component missing |2.3.1| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |