| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 10 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Horn not working |1.7.3a| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Direction indicator obscured |1.5.1a| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Brake pedal mounting cracked . |3.1.2c| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Rear suspension component seized |2.4A2a|ii|| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Registration plate issues | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Stop lamp not working rear brake light intermittent working (4.3.1 (a) (ii)) | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Handlebar handgrip missing |2.1.1c| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear Rear suspension bearing has excessive free play swing arm pivot |2.4.A2a|i|| | 1 |
| Centre Front Upper Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |