| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 12 |
| Headlamp aim out of alignment | 10 |
| Registration plate issues | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Front Brake lever attachment screws missing |3.1.2b| | 1 |
| Brake locking device missing split pins missing from torque arm |3.2.A1e| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Wheel spindle locking device missing brake torsion bar (5.2.1 (d)) | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii|| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Headlamp switch faulty |1.2.4| | 1 |
| Rear Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Front Brake lever is inoperative |3.1.3c| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Direction indicator incorrect colour |1.5.1b| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Front Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Central Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Nearside Rear Drive chain horseshoe locking device likely to become detached (6.1.7 (j) (ii)) | 1 |
| Offside Rear Brake component insecure (1.1.21 (c)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Offside Front Brake component inadequately mounted flexi brake pipe contact with radiator cap (1.1.21 (c)) | 1 |
| Chain guard insecure fixings making contact with drive chain (6.1.7 (i)) | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Headlamp aim beam image too far to the left |1.6.4| | 1 |
| Front Wheel more than one fixing missing |5.2.1 |a| |ii|| | 1 |
| Rear Wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Offside Direction indicator not working both (4.4.1 (a) (ii)) | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Chain guard insecure |6.2.1c| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |