Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 10 |
Headlamp aim out of alignment | 8 |
Registration plate issues | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Horn not working |1.7.3a| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front mudguard insecure |2.3.7| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Rear Direction indicators not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Handlebar deformed both |2.1.1b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Outer Brake locking device missing |3.2.A1e| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake locking device missing reaction arm split pins missing |3.2.A1e| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Steering operation fouling on the fuel tank or bodywork on full lock handlebar (2.1.4 (b)) | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Rear Lower Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Offside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Inner Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Stop lamp not working rear brake |4.3.1 |a| |ii|| | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |