| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 13 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Registration plate issues | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Registration plate lamp issues | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Motorcycle structure joining/attachment plate or fastening insecure Fairing frame bracket (6.1.1 (b) (i)) | 1 |
| Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Lower All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Offside Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| All position lamps not working front and rear (4.2.1 (a)) | 1 |
| Brake lever pivot has excessive free play control one (1.1.1 (b)) | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies Handle bar lever |1.3.1a| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Centre Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Centre Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Throttle operating incorrectly Not returning
|6.2.1f| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Outer Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect kick up wrong side (4.1.2 (c)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Drive chain worn to excess wheel bearing not checked , chain to rough (6.1.7 (c) (i)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |