Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Drive chain excessively loose |6.2.1d| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Registration plate issues | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake caliper operating mechanism has excessive travel |1.1.16 |e| |i|| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear wheel bearings have excessive free play sprocket carrier |2.4.A.2c| | 1 |
Roller brake test indicates excessive fluctuation of brake effort rear |3.3.A1d| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Horn not working |1.7.3a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Brake hose damaged | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake indicates excessive fluctuation of brake effort 35kg |1.2.1 |e|| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Motorcycle structure is so deformed it is likely to adversely affect braking or steering side stand fouling exhaust and cant be fully retracted (6.1.1 (a) (ii)) | 1 |
Front Horn not working |7.7 |a| |ii|| | 1 |
Front Brake master cylinder leaking PIPE (1.1.10 (b) (ii)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |