Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Registration plate issues | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Direction indicators not working |1.5.1c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Horn not working |1.7.3a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Drive chain excessively tight |6.2.1d| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Upper Fork yoke deformed |2.1.1b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Rear Brake cylinder severely corroded |3.2.B1b| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front position lamp does not illuminate immediately when switched on side |1.1.3a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Stop lamp not working Front brake lever (4.3.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Drive chain excessively loose |6.2.1d| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Centre Rear Lower Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Upper Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Central Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Rear Direction indicator incorrect colour White light. (4.4.3 (a)) | 1 |
Nearside Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Offside Rear Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
Central Front Steering linkage locking device missing (2.1.3 (d)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Horn control defective |1.7.2a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Front Lower Front suspension assembly component missing |2.3.1| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Registration plate lamp issues | 1 |
Rear Drive belt excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |