| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 7 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
| Front Wheel fixing missing (multiple fixings) (5.2.1 (a) (i)) | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Nearside Front Direction indicator insecure |1.5.3b| | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Brake lever mounting cracked |3.1.2c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Headlamp insecure Lens (4.1.1 (c)) | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Wheel fixing missing (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Front Brake cable excessively corroded |3.2.A1b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake component insecure (1.1.21 (c)) | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Lower Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
| Horn not working |1.7.3a| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Lower Rear suspension component loose |2.4.A.1a| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |