Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Registration plate issues | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn not working |1.7.3a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Steering lock stop maladjusted |2.1.3| | 1 |
Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Position lamp switch insecure |1.1.4b| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Brake hose damaged | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear suspension bearing excessively deteriorated swinging arm bush |2.4A.2a|i|| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Horn is not a constant note |1.7.3c| | 1 |
Offside Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |