Most common failures | No# failures |
---|
Horn not working |1.7.3a| | 3 |
Headlamp aim out of alignment | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Registration plate issues | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Fuel system component leaking fuel tap |7.2.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |