Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Drive chain excessively loose |6.2.1d| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Horn not working |1.7.3a| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Registration plate issues | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Footrest insecure (6.2.12 (a)) | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Drive chain |6.2.1h| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Brake locking device missing brake arm |3.2.A1e| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride split link |6.2.1h| | 1 |
Rear Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Wheel spoke missing |4.2.1b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear suspension component loose Swing arm bolt |2.4.A.1a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Central Front Exhaust is leaking and excessively noisey at cylinder head |7.1.1b| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies when foot brake applied |1.3.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock right hand lock |2.1.4| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Rear suspension component misaligned |2.4.A.1a| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Position lamp switch insecure |4.2.2 |b|| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |