Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Drive chain excessively loose |6.2.1d| | 7 |
Registration plate issues | 6 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake performance not tested |3.3| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Headlamp aim beam image too far to the right |1.6.4| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking upon right turn (6.2.7 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Brake drum insecure split pin missing (1.1.14 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Headlamp lens seriously defective kickup on wrong side (4.1.1 (b) (ii)) | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Lower Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Centre Front Lower Front position lamp missing |1.1.1a| | 1 |
Centre Front Upper Riders seat insecure |6.2.1a| | 1 |
Offside Rear Lower Brake locking device insecure |3.2.A1e| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear suspension component excessively corroded. swinging arm |2.4.A.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Inner Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Brake lever cracked |3.1.2c| | 1 |
Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |