>

MOT History from tests of petrol YAMAHA SRs year 1996

Review the list of common YAMAHA SR failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:74.68%
(The average a petrol YAMAHA SR year 1996 passes without issue)
Based on:237 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment9
Registration plate issues5
Drive chain excessively loose |6.2.1d|4
Exhaust is leaking and excessively noisey |7.1.1b|3
Rear wheel spindle securing nut locking device missing |2.4.A.2b|3
Horn not working |1.7.3a|3
Steering headbearing has excessive free play |2.2.2|3
Front Roller brake test indicates a binding brake |3.3.A1a|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Rear reflector on motorcycle missing |1.4.1|3
Drive chain worn to excess |6.2.1e|3
Nearside Front Direction indicators not working |1.5.1c|3
Offside Steering lock stop ineffective |2.1.3|2
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|2
Registration plate lamp issues2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Rear Drive chain sprocket worn to excess |6.2.1e|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Front wheel bearings have excessive free play |2.3.5b|2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Central Front Exhaust has a major leak of exhaust gases Manifold has bad leak (6.1.2 (a))1
Nearside Rear Drive chain worn to excess (6.1.7 (c) (i))1
Central Front Wheel alignment incorrect which adversely affects the steering steering kicking of to the left when handle bars are straight (2.4 (a))1
Central Front Fuel system component leaking Intake manifold is insure and likely to fall of (6.1.3 (b) (i))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Front Wheel more than one fixing missing |5.2.1 |a| |ii||1
Rear Wheel more than one fixing missing |5.2.1 |a| |ii||1
Rear reflector missing |4.8.2 |a| |ii||1
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))1
Front Stop lamp does not emit a steady light |1.3.1b|1
Exhaust excessively deteriorated |7.1.1a|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Offside Rear Direction indicator not working |1.5.1c|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front Upper Front position lamp deteriorated and function impaired |1.1.1b|1
Inner Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Front Front suspension assembly component loose |2.3.1|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Rear Rear wheel bearings are excessively rough |2.4.A.2c|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Brake lever has inadequate reserve travel |3.1.3b|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Exhaust excessively deteriorated |7.1.1a|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Brake pedal is inoperative |Rear Brake Arm Seized| |3.1.3c|1
Steering lock stop ineffective |L/H Lock Fork Leg Contacts Fuel Tank| |2.1.3|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Direction indicators not working |1.5.1c|1
Nearside Footrest missing |6.2.1a|1
Front Horn not working |1.7.3a|1
Centre Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j|1
Centre Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Direction indicator obviously incorrectly positioned Rear indicators less than 180mm apart (4.4.3 (a))1
Central Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced Rear sub frame has been modified (6.1.1 (b) (ii))1
Direction indicators not working (1.5.1c)1
Horn not loud enough to be heard by another road user (1.7.3a)1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Riders seat insecure |6.2.1a|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Offside Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Offside Rear Brake pedal cannot be released smoothly |3.1.3d|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Headlamp damaged and function impaired |1.2.3a|1
Rear Footrest missing |6.2.1a|1
Nearside Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii))1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Rear position lamp damaged and function impaired |1.1.1b|1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Front Brake excessively binding (1.2.1 (f))1
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Horn control defective insecure |1.7.2a|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Nearside Rear Direction indicators not working |1.5.1c|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy