Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Registration plate issues | 6 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Horn not working |1.7.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear position lamp adversely affected by the operation of another lamp only works on main beam |1.1.3b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever has inadequate reserve travel lever adjusting screw was fouling throttle body |3.1.3b| | 1 |
Nearside Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear Chain guard fouling another component |6.2.1c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Brake pivot has restricted free movement |1.1.15 |e|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Centre Fuel system component leaking |7.2.1a| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Suspension component ball joint excessively worn lower front link bush has play (5.3.4 (a) (i)) | 1 |
Front Brake master cylinder insecure front brake lever lock nut missing (1.1.10 (c)) | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Front wheel spindle loose |2.3.5a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Rear Wheel spoke missing |5.2.2 |d|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Stop lamp does not illuminate immediately a brake applies front lever |1.3.1a| | 1 |
Brake hose fouling fuel tank |3.2.B3b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain split link |6.2.1h| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Front Stop lamp not working front brake control |4.3.1 |a| |ii|| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Nearside Outer Lower Handlebar deformed |2.1.1b| | 1 |
Centre Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
Wheel spoke missing REAR |4.2.1b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Upper Horn not working (7.7 (a)) | 1 |