MOT History from tests of petrol YAMAHA RSX100s year 1991

Review the list of common YAMAHA RSX100 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history

Pass percent:60.00%

(The average a petrol YAMAHA RSX100 year 1991 passes without issue)

Based on:40 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	5
Rear reflector on motorcycle missing \|1.4.1\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Horn not working \|1.7.3a\|	1
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Drive chain excessively tight \|6.2.1d\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Direction indicators not working \|1.5.1c\|	1
Offside Front Direction indicator incorrect colour \|1.5.1b\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Front position lamp deteriorated and function impaired \|1.1.1b\|	1
Rear Drive chain worn to excess \|6.2.1e\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Horn not working \|1.7.3a\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	5
Rear reflector on motorcycle missing \|1.4.1\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Horn not working \|1.7.3a\|	1
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	1
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Drive chain excessively tight \|6.2.1d\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Direction indicators not working \|1.5.1c\|	1
Offside Front Direction indicator incorrect colour \|1.5.1b\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Front position lamp deteriorated and function impaired \|1.1.1b\|	1
Rear Drive chain worn to excess \|6.2.1e\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Horn not working \|1.7.3a\|	1
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1

MOT History from tests of petrol YAMAHA RSX100s year 1991

Find us on Facebook