Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Registration plate issues | 6 |
Horn not working |1.7.3a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Brake performance not tested rear brake has no performance (1.2.1 (g)) | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim beam image kick up to the offside (1.6) | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp not working Front brake application. (4.3.1 (a) (ii)) | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Fairings insecure and likely to impede the steering oil tank |2.1.2e| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake performance not tested |1.2.1 |g|| | 1 |
Rear Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Front Brake hose leaking fluid sweat at banjo |3.2.B4| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |